# How to Store Christmas Lights: Test, Untangle and Wrap Them So They Work Next Year

- Link: https://kindredspacefinds.com/how-to-store-christmas-lights/
- Published: 2026-11-01T11:30:44+00:00
- Author: Avery Linden

Quick answer: wrap each strand around a notched piece of cardboard or a reel the
day it comes down, label it with its length and whether it’s rated for outdoor use,
and keep all of them in one latching tote. That’s the whole system. The rest of 
this guide covers the two parts people skip: checking strands before they go up,
so damaged sets get tossed instead of hung, and sizing the wrap so a strand actually
fits.

By [Avery Linden](https://kindredspacefinds.com/author/avery-linden/) · Updated 
November 2026 · Workspace & Garage

![A pile of Christmas string lights on a table](https://kindredspacefinds.com/wp-
content/uploads/2026/11/download-4.jpg)

Photograph by [Alpha Perspective](https://unsplash.com/@alphaperspective) / Unsplash.

**The short version**

Inspect every strand unplugged, then test it. Toss anything with cracked sockets
or bare wire. Untangle from the plug end. Wrap on a card, reel or hanger. Label 
length, indoor or outdoor, color and where it goes. Store in one tote where it won’t
be crushed or get wet.

## Step 1: Inspect before you test (and before you hang)

Lay each strand out on a table or clean floor with it unplugged. The U.S. Consumer
Product Safety Commission advises checking every set of lights, new or old, for 
broken or cracked sockets and frayed or bare wires, and throwing away damaged sets.
Look closely at the plug and where the wire enters each socket, since that’s where
wear shows up.

Also check the tag near the plug:

 * **A testing-lab mark.** CPSC recommends lights tested for safety by a recognized
   testing laboratory. Look for a mark from one such as UL, ETL or CSA on the tag
   or package.
 * **Indoor or outdoor.** CPSC says to check that lights are labeled for outdoor
   use before using them outside. Indoor-only sets stay indoors.
 * **Maximum connections.** Many sets print how many strands can be connected end
   to end. Stay within it.

Then plug it in. If a section is dark, many plug-in sets have replacement fuses 
in a small compartment in the plug, and some come with spare bulbs. Unplug before
opening the fuse door or replacing a bulb.

![A person holding a lit strand of string lights](https://kindredspacefinds.com/
wp-content/uploads/2026/11/download-5.jpg)

Test each strand before it goes on the tree or the porch. Photograph by [Jasmin Schreiber](https://unsplash.com/@lavievagabonde)/
Unsplash.

## Step 2: Untangle from the plug end

Find the plug, then work along the strand, loosening knots rather than pulling on
them. Pulling on the wire is what stresses sockets and connections. A second person
feeding slack helps with long strands. If a strand is badly knotted and also old
or damaged, that’s a good sign to replace it rather than spend an hour.

## Step 3: Choose a wrapping method

Any method works if you use it every year. The choice comes down to how many strands
you have and how much room you have to store them.

| Method | Best for | Trade-off | 
| Notched cardboard card | Any strand; free | Flat cards stack well but can bend if the box gets crushed | 
| Plastic reel or spool | Long outdoor strands | Takes more room; costs a little | 
| Clothes hanger | A few strands hung in a closet | Needs rod space | 
| Bucket or coffee can, coiled | Short strands, quick takedown | Easy to fill fast; still needs care to avoid knots | 
| Original box | Pre-lit pieces or new sets | Rarely fits once the lights are off the form |

### How to wrap a card

 1. Cut a rectangle from a sturdy shipping box.
 2. Cut a small slit in one short end and tuck the plug into it.
 3. Wrap the strand around the card’s length, keeping it snug but not tight, so bulbs
    sit side by side rather than stacked.
 4. Tuck the end plug into a slit at the other end.
 5. Write the label on the card itself.

**Worked example:** a 25-foot strand is 300 inches long. On a card about 12 × 6 
inches, each loop around the card uses roughly 36 inches (12 + 6 + 12 + 6). That’s
about 8 to 9 loops, which fits comfortably on one card. A 50-foot outdoor strand
would need about 17 loops; that’s where a larger card or a reel is easier. Bulb 
size changes how much room each loop needs, so measure your strand’s listed length
and wrap one card as a test.

## Step 4: Label everything

Next year’s decorating goes faster when each card says exactly what it is. Write
or print:

 * Length (from the tag or package)
 * Indoor or outdoor
 * Color and bulb type, such as warm white mini or multicolor C9
 * Where it went: tree, porch railing, front window
 * The year you tested it

A label maker makes this quick for a big batch; our [label maker comparison](https://kindredspacefinds.com/best-label-makers-home-organization/)
covers handheld and Bluetooth options. A permanent marker on the card works just
as well.

![A Christmas tree wrapped in glowing string lights](https://kindredspacefinds.com/
wp-content/uploads/2026/11/download-6.jpg)

Labeling which strand went on the tree saves guesswork next year. Photograph by 
[freestocks](https://freestocks.org) / Unsplash.

## Step 5: Store them in one tote, somewhere dry

Put the wrapped cards on edge in a single latching tote, like files in a drawer,
with extension cords, timers and spare fuses in a zip bag on top. Standing the cards
on edge means you can pull one without unpacking the rest. Our [ornament and decoration storage comparison](https://kindredspacefinds.com/best-christmas-ornament-storage/)
includes a latching tote sized for lights and garland.

Store the tote where it won’t be crushed under heavy boxes or sit in water: a closet
shelf, a sturdy garage shelf, or overhead garage storage that clears the door track.
Our [garage ceiling storage guide](https://kindredspacefinds.com/garage-ceiling-storage/)
covers what to check before putting bins overhead.

## Safety notes for this season

 * **Extension cords:** CPSC advises using cords rated for the intended use, and
   its holiday tips say to use no more than three standard-size sets of lights per
   single extension cord. Follow the connection limit printed on your lights too.
 * **Outdoor outlets:** CPSC recommends plugging outdoor lights into circuits protected
   by ground fault circuit interrupters (GFCIs).
 * **Fasten outdoor strands** securely to the house, railing or tree so wind doesn’t
   damage them.
 * **Turn them off** when you go to bed or leave the house; CPSC notes lights could
   short and start a fire. A plug-in timer handles this automatically.
 * **Taking them down:** unplug first, unclip rather than pull, and wrap each strand
   right away so it never makes it into a loose pile.

**Christmas lights checklist**

 * Each strand inspected unplugged for cracked sockets and bare wire.
 * Testing-lab mark and indoor/outdoor rating checked.
 * Damaged strands thrown away, not stored.
 * Strands untangled from the plug end.
 * Wrapped on cards or reels, plugs tucked in.
 * Labeled: length, indoor/outdoor, color, location, year tested.
 * Stored on edge in one tote, dry and uncrushed.

### Helpful light storage supplies

**Affiliate disclosure:** As an Amazon Associate I earn from qualifying purchases.
These links open Amazon search results for each type of item, not recommendations
for a specific model we’ve tested.

 * [Christmas light storage reels on Amazon ↗](https://www.amazon.com/s?k=christmas+light+storage+reel&tag=shoppingd0151-20)
 * [Light storage bags with wrap cards on Amazon ↗](https://www.amazon.com/s?k=christmas+light+storage+bag+with+wraps&tag=shoppingd0151-20)
 * [Outdoor plug-in timers on Amazon ↗](https://www.amazon.com/s?k=outdoor+plug+in+timer+christmas+lights&tag=shoppingd0151-20)
 * [Latching storage totes on Amazon ↗](https://www.amazon.com/s?k=latching+storage+tote+red+lid&tag=shoppingd0151-20)

## Questions

What’s the best way to store Christmas lights so they don’t tangle?

Wrap each strand around something rigid, such as a notched cardboard card or a reel,
with both plugs tucked in, and store the wrapped strands on edge in a tote so they
can’t shift into a pile.

Should I keep a strand that only partly lights?

Check the fuse in the plug and any loose bulbs first, with the strand unplugged.
If the wires or sockets are damaged, CPSC’s advice is to throw the set away.

Can indoor lights be used outside?

No. CPSC advises checking that lights are labeled for outdoor use before installing
them outside, and plugging outdoor lights into GFCI-protected circuits.

**Sources:** [U.S. Consumer Product Safety Commission, Holiday Decoration Safety Tips](https://www.cpsc.gov/Newsroom/News-Releases/2002/CPSC-Releases-Holiday-Decoration-Safety-Tips-for-Avoiding-Fires-and-Injuries).
General guidance; follow the instructions on your lights. See our [editorial policy](https://kindredspacefinds.com/editorial-policy/).

![How to store Christmas lights so every strand works next year](https://kindredspacefinds.
com/wp-content/uploads/2026/11/pin-how-to-store-christmas-lights.jpg)

Save this guide to your Pinterest board for take-down day.

Keep reading

## More guides for your space

[Workspace & GarageBest Christmas Ornament and Decoration Storage: 4 Picks for Garages, Closets and Tight Spaces](https://kindredspacefinds.com/best-christmas-ornament-storage/)
[Closet Systems13 Gift Wrap Storage Ideas That Keep Rolls From Crushing and Tape From Vanishing](https://kindredspacefinds.com/gift-wrap-storage-ideas/)
[Workspace & GarageGarage Ceiling Storage: Check These 3 Things Before You Drill](https://kindredspacefinds.com/garage-ceiling-storage/)

THE KINDRED JOURNAL

## Latest from the journal

 * [⌊A loose pile of mixed cables and cords waiting to be sorted⌉⌊A loose pile of
   mixed cables and cords waiting to be sorted⌉[
 * [Cord and Cable Storage: 13 Ideas for the Spare Chargers, Cables and Adapters Nobody Can Find](https://kindredspacefinds.com/cord-storage-ideas/)
 * Match every cable to a device you still own, keep a sensible number of spares
   by connector type, coil them loosely, label the mystery bricks, hang the extension
   cords and send old batteries and dead cables to a proper drop-off: thirteen ways
   to store spare cords so the right one turns up in seconds.
 * [⌊Condensation covering the inside of a window glass with soft blue and golden
   light behind it⌉⌊Condensation covering the inside of a window glass with soft
   blue and golden light behind it⌉[
 * [Window Condensation in Winter: Find Which Side the Water Is On, Then Match Humidity to the Forecast](https://kindredspacefinds.com/window-condensation-winter/)
 * Do the wipe test to tell room-side fog from a failed seal, check a hygrometer
   against the outdoor low, keep humidity at or under 40% above 20°F and 30% below
   10°F, run the fans, open the curtains by day and dry wet sills the same morning:
   a window condensation guide with a worked cold-week example.
 * [⌊A stainless steel range hood mounted above a stove in a modern kitchen⌉⌊A stainless
   steel range hood mounted above a stove in a modern kitchen⌉[
 * [How to Clean a Range Hood Filter Before Holiday Cooking: Know Your Filter Type, Then Put It on the Calendar](https://kindredspacefinds.com/range-hood-filter-cleaning/)
 * Wash metal mesh and baffle filters in hot soapy water or the dishwasher, replace
   charcoal filters instead of rinsing them, never run the hood with the filter 
   out, and clean the weekend before Thanksgiving and again before Christmas: a 
   range hood filter guide with a worked holiday cleaning calendar.
 * [⌊Clothes and towels hung to dry on a folding rack against a textured wall⌉⌊Clothes
   and towels hung to dry on a folding rack against a textured wall⌉[
 * [Drying Clothes Indoors in Winter: Where the Rack Goes, How Much Rail You Need and What It Saves](https://kindredspacefinds.com/indoor-drying-rack-ideas/)
 * One load gives off about 2 liters of water as it air-dries, so put the rack where
   that moisture can leave, keep it 3 feet from the space heater, count inches of
   rail before you buy, space and turn the heavy things, watch humidity and window
   condensation, and know what the dryer you’re skipping really costs: indoor drying
   with the math.
 * [⌊A pair of brown and white knit gloves resting on bare winter twigs⌉⌊A pair 
   of brown and white knit gloves resting on bare winter twigs⌉[
 * [Hat, Glove and Scarf Storage by the Door: One Bin Per Person, Sized to What They Actually Wear](https://kindredspacefinds.com/hat-glove-scarf-storage/)
 * Keep a daily set plus one dry spare per person, size an open bin for each from
   a quick measurement, dry wet mittens before they go in, clip pairs together, 
   hang woven scarves and fold knits, skip long scarves on the playground and wash
   wool before it’s sealed away: a hat and glove station with a worked bin-size 
   example.
 * [⌊A made bed under a window in a small attic bedroom⌉⌊A made bed under a window
   in a small attic bedroom⌉[
 * [Guest Room That Doubles as Storage: Pick the Bed by Floor Space, Keep the Window Clear](https://kindredspacefinds.com/guest-room-storage/)
 * Count the nights the room really hosts, compare bed footprints before comfort,
   put storage on one wall behind a curtain, keep the window and door clear, leave
   guests half the closet and one drawer, and pack a single guest bin: a storage
   room that turns into a guest room in fifteen minutes, with a worked 10 by 11 
   foot example.
 * [⌊A wooden dining table with chairs in a dining room of an older home⌉⌊A wooden
   dining table with chairs in a dining room of an older home⌉[
 * [Dining Room Storage for Holiday Hosting: Measure the Walkway First, Then Fit the Sideboard](https://kindredspacefinds.com/dining-room-storage-ideas/)
 * Measure the table with the leaf in, leave 44 inches where people walk and 32 
   where nobody passes, subtract the sideboard’s depth before you buy, anchor the
   hutch and give the leaf, extra chairs and holiday linens a home: dining room 
   storage planned for the biggest night of the year, with a worked placement example.
 * [⌊A black car on a snow-covered road in winter⌉⌊A black car on a snow-covered
   road in winter⌉[
 * [Winter Car Emergency Kit: 12 Things to Pack and Where Each One Should Ride](https://kindredspacefinds.com/winter-car-emergency-kit/)
 * Start from the National Weather Service list, put the heavy gear in one strapped-
   down trunk bin, keep the blanket, light and charger in the cabin and the scraper
   in the door, and know the stranded-car basics: twelve ideas for a winter car 
   kit that stays packed until February.
 * [⌊A round white smoke alarm mounted on a bare concrete ceiling⌉⌊A round white
   smoke alarm mounted on a bare concrete ceiling⌉[
 * [Smoke and CO Alarms: A One-Hour Audit of Where They Go, How Old They Are and What to Replace](https://kindredspacefinds.com/smoke-and-co-alarm-check/)
 * Put a smoke alarm in every bedroom, outside each sleeping area and on every level,
   add CO alarms outside sleeping areas, keep them 10 feet from the stove, read 
   the date on the back and replace anything 10 years old: a one-hour alarm audit,
   with a worked two-story example.

Browse by room[Kitchen & Pantry](https://kindredspacefinds.com/category/kitchen-pantry/)
[Bathroom](https://kindredspacefinds.com/category/bathroom-storage/)[Closets & Bedroom](https://kindredspacefinds.com/category/closet-systems/)
[Workspace & Garage](https://kindredspacefinds.com/category/workspace-garage/)[All guides →](https://kindredspacefinds.com/guides/)
