15 Things in Your Home Quietly Raising Your Electric Bill

Your electric bill went up again, and you can’t point to anything you did differently. That’s usually the problem: the biggest drains aren’t things you do, they’re things that run in the background all day. Most of the fixes below cost nothing or very little, and you can check the whole list in one walk around the house.

By Avery Linden · Updated October 2026 · Save on Bills

Residential electric meter on an outside wall
Your meter keeps counting even when you think everything is off. Photograph by Jon Moore / Unsplash.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Shopping links in this post open Amazon search results for a type of item, not a specific product we’ve tested.

In the kitchen and laundry room

1. The second fridge in the garage

An older refrigerator kept as a “beer fridge” is one of the most common hidden costs in a house. Older models use far more electricity than current ENERGY STAR units, and a garage that gets hot in summer makes the compressor run even harder. If it holds a few drinks and a bag of ice, unplugging it is often the single easiest saving on this list. Many utilities also run appliance recycling programs that pick up old fridges, sometimes with a small rebate.

Check it: touch the sides and back. If it feels warm and runs almost constantly, it’s working hard.

Kitchen with wooden cabinets and a stainless steel refrigerator
The fridge runs around the clock, so small problems like dusty coils add up. Photograph by Andrew Kayani / Unsplash.

2. Dusty refrigerator coils

The coils on the back or bottom of your main fridge release heat. Coated in dust and pet hair, they release it slowly and the compressor runs longer. Unplug the fridge, pull off the bottom grille, and clean the coils with a coil brush or vacuum attachment once or twice a year.

3. A water heater set too hot

Many tank water heaters ship set around 140°F. The U.S. Department of Energy suggests 120°F for most households, which also lowers the risk of scalding. Water heating is one of the larger energy uses in most homes, so a lower setting adds up. If anyone in the home has a weakened immune system, ask your doctor before lowering it.

4. A clogged dryer vent

Cleaning the lint screen isn’t enough. Lint builds up in the duct behind the dryer, so each load takes longer and the dryer works harder. A blocked vent is also a fire risk. If loads that used to take 45 minutes now take 70, clean the full vent run or have it cleaned. Dryer vent cleaning kits on Amazon ↗

5. Running the dishwasher’s heated dry

The heated-dry setting uses extra energy to finish what air would do on its own. Switch to air-dry or open the door a crack once the cycle ends. Run only full loads, too.

6. Washing everything in hot water

Most of the energy a washing machine uses goes to heating water. Modern detergents work well in cold for everyday loads. Save hot water for heavily soiled items, bedding during illness, and the like.

Heating and cooling

7. A thermostat that never changes

Heating and cooling are usually the largest part of a home’s energy use. The Department of Energy notes you can save on heating and cooling by turning the thermostat back several degrees while you’re asleep or away. A programmable or smart thermostat does it automatically. Our guide to thermostat mistakes covers the settings that backfire.

8. A dirty HVAC filter

A clogged filter makes your furnace or air conditioner push air through a wall of dust. Check it monthly during heavy-use seasons and replace it when it looks gray. Write the size on the furnace cabinet so you buy the right one every time.

9. Gaps around doors and windows

If you can feel a draft, you’re paying to heat or cool the outdoors. Weatherstripping and caulk are among the cheapest upgrades you can make. Our walkthrough of where your home loses heat shows the spots most people miss.

10. Space heaters doing the furnace’s job

A space heater can make sense for warming one room you’re sitting in. Running several of them for hours, or using one to heat a whole floor, is an expensive way to heat a house. Keep heaters at least 3 feet from anything that can burn, plug them directly into a wall outlet, and never leave one running unattended.

Around the house

11. Electronics that are never really “off”

TVs, game consoles, cable boxes, chargers, and smart speakers draw power around the clock in standby. One device doesn’t use much, but a living room full of them does. Plug entertainment centers into a power strip you can switch off at night, or use a smart plug on a schedule. Our phantom power guide shows how to measure standby draw and what to leave plugged in. Smart plugs with energy monitoring on Amazon ↗

12. Game consoles left in “instant-on” mode

Many consoles default to a rest or instant-on mode so they can update in the background. That convenience costs power every hour the console isn’t in use. Switching to the energy-saving mode in settings usually takes a minute.

13. Old incandescent or halogen bulbs

If you still have any, swap them for LEDs. According to the Department of Energy, LED bulbs use at least 75% less energy than incandescent bulbs and last much longer. Start with the fixtures you use most: kitchen, porch, and living room.

14. A pool or hot tub pump on an old schedule

Pool pumps can be among the largest single electric loads in a home. Many run longer than needed. Ask your pool technician whether a shorter run time works for your setup, and look at variable-speed pumps when it’s time to replace.

15. A dehumidifier or well pump that never stops

A dehumidifier in a basement that’s set too low will run nonstop. Set it to a reasonable level instead of the lowest number. If you’re on a well, a pump that cycles constantly can point to a leak or a pressure tank problem worth checking.

Find your own biggest drain: a plug-in electricity usage monitor shows how much power any appliance uses over a day or week. Test the garage fridge, the dehumidifier, and the TV setup first. The results often surprise people. Electricity usage monitors on Amazon ↗

Want the next step? Our list of 12 ways to cut your electric bill without solar turns these fixes into a weekend plan.

Common questions

What uses the most electricity in a typical home?

In most homes, heating and cooling come first, followed by water heating and then large appliances like refrigerators, washers, and dryers. That’s why the thermostat and water heater settings above usually matter more than unplugging small gadgets.

How can I find out which appliance is the problem?

Start with your utility’s website or app: many show usage by day or hour, so you can spot spikes. For individual appliances, a plug-in usage monitor shows exactly what each one draws over a day or a week.

Is unplugging phone chargers worth it?

A single idle phone charger uses very little. The bigger standby users are entertainment setups, game consoles, cable boxes, and older appliances. Focus on those first.

My bill jumped but nothing changed. What should I check?

Compare this bill with the same month last year to rule out weather. Then check for a rate change on the bill, a new appliance or space heater, a water heater problem, or a well pump or dehumidifier running nonstop. If nothing explains it, ask your utility to check the meter reading.

Related: How to read your electric bill · Dryer vent warning signs

15 things in your home quietly raising your electric bill
Save this list to your Pinterest board.

Keep reading

More ways to save at home

THE KINDRED JOURNAL

Latest from the journal